QV Flare Up Bath Oil 200g

Directions

• Fill bath with water. There should be at least enough water in the bath to submerge the QV Flare Up Bath Oil bottle to the marked "fill line".
• Add QV Flare Up Bath Oil to the bath a drop at a time, stirring the water gently by hand to ensure the product is distributed evenly throughout. The water will start to become cloudy.
• There are 2 panels on the back of the QV Flare Up Bath Oil bottle, 1 black, and 1 grey. Submerge the bottle in the bath until the fill line on the bottle and the water level in the bath meet.
• There is enough QV Flare Up Bath Oil in the bath when the grey panel blends with the cloudiness of the water and is no longer visible. You should still be able to see the black panel.
• If both panels are still visible, repeat steps 2 through 3 until only the black panel is visible.
• Note that the panels will not change colour in any way, and will still be present when the pack is removed from the water.
• If neither panel is visible, there is too much QV Flare Up Bath Oil in the water. Add more water to the bath and repeat steps 2 thorugh 3 until only the black panel is visible.
• Soak in the bath for 10-15 minutes. Gently pat skin to dry.

Ingredients

Benzalkonium chloride 2% w/w, Triclosan 0.7% w/w, Light liquid paraffin 65.1% w/w

Cautionary Instructions

• Use only as directed. Do not use undiluted or inadequately diluted.
• For external use only, do not swallow.
• Avoid any undiluted product contacting skin or eyes. If product enters eyes, rinse thoroughly with clean water.
• If there is persistent irritation or sensitivity to any ingredient, stop treatment and consult your doctor.
• Do not use with soap or detergent as these may reduce the activity of benzalkonium chloride.